Value Content
WIM Auto Logout Timer Web Image Monitor auto logout timer
Extended Security Extended Security
Firmware Update Start Firmware Update
Configuration Name / Configuration Value
Indicates the attributes of the categories.
Indicates the values of the attributes.
Attribute Description
Lockout Whether the lockout is active (Active) or inactive (Inactive) is
recorded.
Number of Attempts before
Lockout
The number of times a user may enter a login password is
recorded.
Lockout Release Timer Whether the lockout release timer is active (Active) or inactive
(Inactive) is recorded.
Lock Out User for The time until lockout release is recorded.
Auto Logout Timer Whether Auto Logout Timer is set to (On) or (Off) is recorded.
Auto Logout Timer (seconds) The time until the auto logout operates is recorded.
Operation Mode The type of operation is recorded.
Certificate No. The number of the certificate to be used is recorded.
Certificate No.: IEEE 802.1X
(WPA/WPA2)
The number of the certificate for applications is recorded.
When no certificate is used, "Do not Use" is recorded.
Certificate No.: IPsec The number of the certificate for applications is recorded.
When no certificate is used, "Do not Use" is recorded.
IPsec Whether IPsec is active (Active) or inactive (Inactive) is
recorded.
Encryption Key Auto
Exchange: Setting1-4: Remote
Address
The remote address is recorded.
Using Web Image Monitor to Manage Log Files
133
To Next Page
Loading...
