Attribute Description
Encryption Key Auto
Exchange: Setting1-4, Default:
Security Level
The security level is recorded.
When [Authentication Only] is selected, "Authentication Only"
is recorded.
When [Authentication and Low Level Encryption] is selected,
"Authentication and Low Level Encryption" is recorded.
When [Authentication and High Level Encryption] is selected,
"Authentication and High Level Encryption" is recorded.
When [User Settings] is selected, "User Settings" is recorded.
Encryption Key Auto
Exchange: Setting1-4, Default:
Authentication Method
The authentication method used for the auto key exchange
format is recorded. Either "PSK" or "Certificate" is recorded.
WIM Auto Logout Timer
(minutes)
Web Image Monitor's auto logout timer log is recorded in
increments of one minute.
Update Firmware A log entry reporting changes to the [Update Firmware] setting
is recorded.
"Prohibit" or "Do not Prohibit" is recorded.
Change Firmware Structure A log entry reporting changes to the [Change Firmware
Structure] setting is recorded.
"Prohibit" or "Do not Prohibit" is recorded.
Firmware Update Start A log entry reporting firmware update is recorded.
Destination Server Name
Indicates the name of the server from which the data export or import request was issued when the
log type is for importing or exporting preference information.
HDD Format Partition
Indicates the reason for formatting the hard disk.
Value Content
HDD Exchange The hard disk has been replaced.
Problem with HDD Encryption
Key
There is a problem with the hard disk encryption key.
Problem with Disk Label The disk label cannot be read.
6. Managing the Machine
134
To Next Page
Loading...
