Ricoh Pro C9200 Series - 0804 Applying Binding Glue; Finishing: Stacker; 0901 Ppr Align in Stack Tray: Acr Feed 1

CIP Training Pro C9200 series
Adjustment Settings for Operators
CIP Training C7200 series
Adjustment Settings for Operators
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Tail Edge
Head Edge
Fore Edge
0.0 10.0 -10.0 0.1 mm
0804 Applying Binding Glue
Adjust the amount of binding glue for perfect binding. If there is not enough glue, some
pages may not stick.
If there is too much glue, the glue may be squeezed out of the binding and stick the pages
together making it difficult to open the booklet.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Set 0.00 0.30 -0.30 0.05 mm
Finishing: Stacker
0901 Ppr Align in Stack Tray: Acr Feed 1
Adjust the alignment width in Main Jogger
*1
when output sheets are stacked on the
stacker.
Use the function to reduce the dispersion of paper orientation at a right angle due to
paper size, thickness, curl and so on.
Press [ ] or [ ] to increase or decrease the width.