Setting Item Max. Value Min. Value Step Unit
11: Across Feed 0.500 -0.500 0.001 %
12: With Feed 0.025
[Trapezoidal Distortion Result: Side 1]/[Trapezoidal Distortion Result: Side 2]
Display the perpendicularity (image magnification of trailing edge with across feed direction) of side
1/2 when performing auto adjust image position.
Adjust the proportion with "+" or "-", the present length at the trailing edge being counted as 100%.
Setting Item Max. Value Min. Value Step Unit
13: Operator Side/14: Opposite Side of
Operator/15: Operator Side/16:
Opposite Side of Operator
0.250 -0.250 0.001 %
[Trapezoidal Distortion Result: Adjust Front & Back]
Display the trapezoidal deviation to align the image of side 2 to the image of side 1 when performing
auto adjust image position. The value set here is added to the value of [Trapezoidal Distortion Result:
Side 2].
Adjust the proportion of the trailing edge of Side 2 length with "+" or "-", Side 1 length being counted as
100%.
[Machine: Image Position]
135
To Next Page
Loading...
