Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Tray 1
Tray 2
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Bypass Tray
Extended Option Tray
0.00 3.00 -3.00 0.01 mm
• If sheets are delivered face down, turn them over horizontally and check the image position.
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in [Image Position: Side2] in [Advanced Settings] takes precedence.
0105 Perpendicularity Adjustment
Adjust the image skew (perpendicularity) across the feeding direction.
Press [ ] or [ ] to tilt the image to the left (toward the top) or right (toward the bottom).
Paper feed direction
Default
DWP569
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Correction Value 0 20 -20 1 -
6. Adjustment Settings for Operators
172
To Next Page
Loading...
