0624 Amount of Z-fold Skew Correction
Adjust the striking amount of paper during Z-folding skew correction.
Use this function when Z-folding skew correction causes a side effect.
The default striking amount "0.0" is set to 9 millimeters. Press [ ] to reduce the striking amount. The
amount becomes 0 millimeter when the value is "-9.0".
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Set 0.0 0.0 -9.0 0.5 mm
0625 Amount of Z-fold Skew Correction: Reverse
Adjust the reverse rotation amount of Registration Roller during Z-folding skew correction.
Use this function when Z-folding skew correction causes a side effect.
The default reverse rotation amount "0.0" is set to 3 millimeters. Press [ ] to reduce the reverse rotation
amount. The amount becomes "0" millimeter when the value is "-3.0".
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Set 0.0 0.0 -3.0 0.5 mm
0626 Maximum No. Stacked Sheets in Output Tray
Specify the number of sheets to stack on the Shift Tray at the time of shift sorting.
To avoid paper jams, specify the number according to the paper size.
Setting Items Values Default Value
Paper Length 216 Default
1500 Sheets
1000 Sheets
Default
216<Paper Length 432 Default
1000 Sheets
500 Sheets
Default
432<Paper Length Default
500 Sheets
Default
Setting Values
201
To Next Page
Loading...
