2. Press [Adjustment] for "Front Side Registration" or "Front & Back Registration".
Adjustment is performed by printing five sheets for adjusting the front side or 10 sheets for
adjusting the front and back sides, and one sheet for confirming the adjustment result.
3. Check the adjustment result, and press [Apply].
The setting value that reflects the adjustment result is applied.
• To check the print position only, load a sheet of paper in the tray, and then press [Test
Print] under [Test Print (Front)] or [Test Print (Front & Back)].
• Adjust the print position using [Manual Adjust Image Position] or [Registration to Align
Front and Back Images Using Template] when adjusting the print position on custom
paper in other than white, or if a satisfactory adjustment result could not be obtained
using [Auto Adjust Image Position]. For details about using [Registration to Align Front
and Back Images Using Template] for adjustment, see page 38 "Adjusting the Image
Position of the Either Side of the Paper".
Manual Adjust Image Position
Adjust the print position manually on the custom paper allocated to the tray. For details, see
page 155 "Adjustment Settings for Operators".
Scan the Value
Obtain the paper weight, paper thickness, coating information, and identification data using the
Media Identification Unit.
This item is displayed only when the Media Identification Unit is attached.
Update the Value
Obtain the identification data using the Media Identification Unit.
This item is displayed only when the Media Identification Unit is attached.
Advanced Settings
Specify the advanced settings for the paper.
Only the machine administrator can specify these settings.
Advanced settings can be changed even if the selected custom paper is assigned to a paper tray.
For details, contact your machine administrator.
You can change settings for [Paper Name], [Paper Size], [Apply Duplex], and [Apply Auto Paper
Select] if a custom paper has already been registered using the master library.
Settings that you can change depend on the following:
Registering Custom Paper
37
To Next Page
Loading...
