[Image Position: Side 1]/[Image Position: Side 2]
Adjust the vertical/horizontal position of the image to be printed on side 1/2 of the paper.
Setting Item Max. Value Min. Value Step Unit
01: Across Feed/02: With Feed/03:
Across Feed/04: With Feed
3.00 -3.00 0.01 mm
[Image Magnification: Side 1]/[Image Magnification: Side 2]
Adjust the vertical/horizontal image scaling on the side 1/2 of the paper according to the paper
expansion or shrinkage.
Setting Item Max. Value Min. Value Step Unit
05: Across Feed/07: Across Feed 0.500 -0.500 0.001 %
06: With Feed/08: With Feed 0.025
[Trapezoidal Distortion: Side 1]/[Trapezoidal Distortion: Side 2]
Adjust the perpendicularity (image magnification of trailing edge with across feed direction) of side
1/2.
Adjust the proportion with "+" or "-", the present length at the trailing edge being counted as 100%.
Setting Item Max. Value Min. Value Step Unit
09: Operator Side/10: Opposite Side of
Operator/11: Operator Side/12:
Opposite Side of Operator
0.250 -0.250 0.001 %
4. Details of Menu Items in Advanced Settings
138
To Next Page
Loading...
