• When loading translucent paper, always use long grain paper, and set the paper direction
according to the grain.
• Translucent paper easily absorbs humidity and becomes curled. Remove curl in the translucent
paper before loading. For details about settings for flattening out curled paper, see
page 175 "0301 Correct Output Paper Curl: 1 Sided: Face Up", page 176 "0302 Correct
Output Paper Curl: 1 Sided: Face Down", page 176 "0303 Correct Output Paper Curl: 2
Sided".
• Remove printed sheets one by one.
• When loading coated paper:
• If you want to use glossy paper, select [Coated: Glossy] or [Coated: High Gloss] for [Paper
Type]. If you want to use matted paper (including silk, dull, and satin paper), select [Coated:
Matte] for [Paper Type]. For details about the settings for using coated paper with custom
paper, see page 24 "Registering a Custom Paper".
• When loading coated paper or glossy paper, always fan the paper before using it.
• If a paper jam occurs or if the machine makes a strange noise when feeding stacks of coated
paper, feed the coated paper one sheet at a time.
• To load coated paper into the wide LCT, you must specify [Coated: Glossy], [Coated: Matte],
or [Coated: High Gloss] as the paper type and select an appropriate paper weight under
[Paper Weight].
• When setting colored paper:
• Depending on the color of the paper, the paper's position may not be detected correctly,
causing the paper to jam.
• When using light-colored paper, specify the paper type as [Color] in [Tray Paper Settings].
• When using black or dark colored paper, or when specifying the paper type as [Color] in
[Tray Paper Settings] does not clear paper jams, specify the paper type as [Black].
• When using carbonless paper, note the following:
• Carbonless paper can be used only when Two-tray Wide LCT is used along with Finisher SR
5050 or Booklet Finisher SR5060 for post-processing.
• Duplex printing cannot be performed.
• To load sheets of paper whose sizes are A5 or 5
1
/
2
× 8
1
/
2
:
• When delivering sheets of paper whose sizes are A5 or 5
1
/
2
× 8
1
/
2
, open the left
mainframe front cover and turn the lever for A5/Half Letter to the right.
Recommended Paper
131
To Next Page
Loading...
