Finishing: Perfect Binder
For details about the following items, see page 218 "Finishing: Perfect Binder".
No. Item Description
0801 Perf Bind Cvr Sht Posit:
Across Feed
Adjust the vertical alignment of the cover sheet position
when performing perfect binding.
0802 Perf Bind Cvr Sht Posit:
With Feed
Adjust the horizontal alignment of the cover sheet
position when performing perfect binding.
0803 Perfect Binding Finishing
Angle
Square the top, bottom, and outside edges when
trimming a deck of paper.
0804 Applying Binding Glue Adjust the amount of binding glue for perfect binding.
Finishing: Stacker
For details about the following items, see page 220 "Finishing: Stacker".
No. Item Description
0901 Ppr Align in Stack Tray: Acr
Feed 1
Adjust the alignment width in Main Jogger
*1
when
output sheets are stacked on the stacker.
0902 Ppr Align in Stack Tray: Acr
Feed 2
Adjust the alignment width in Sub Jogger
*1
when output
sheets are stacked on the stacker.
0903 Paper Alignment in Stacker
Tray: With Feed
Adjust the alignment position of the Tip Stopper when
output sheets are ejected on the Stacker.
0904 Ppr Align in 2nd Stack
Tray: Acr Feed 1
Adjust the alignment width in Main Jogger
*1
when
output sheets are stacked on the 2nd stacker.
0905 Ppr Align in 2nd Stack
Tray: Acr Feed 2
Adjust the alignment width in Sub Jogger
*1
when output
sheets are stacked on the 2nd stacker.
0906 Ppr Align in 2nd Stack
Tray: With Feed
Adjust the alignment position of the Tip Stopper when
output sheets are ejected on the 2nd stacker.
0907 Maximum Stack Quantity
in Stacker Tray
Specify the maximum number of sheets that can be
stacked on the stacker tray. The setting applies to both
the 1st and 2nd stackers.
*1
A guide for aligning output sheets. Paper is aligned at both ends.
6. Adjustment Settings for Operators
166
To Next Page
Loading...
