Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Tray 1
Tray 2
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Bypass Tray
Extended Option Tray
0.00 3.00 -3.00 0.01 mm
• If sheets are delivered face down, turn them over horizontally and check the image position.
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in [Image Position: Side1] in [Advanced Settings] takes precedence.
0104 Image Position: Across Feed: Side 2
Adjust the image position (up and down) on side 2 across the feeding direction.
Press [ ] or [ ] to shift the image position upward (toward the back) or downward (toward the front).
DGH006
Right
(Trailing Edge)
Left
(Leading Edge)
Top
Bottom
Paper feed direction
Setting Values
171
To Next Page
Loading...
