Setting Items Values Default Value
Set Default (Paper
Weight 2)
Thin Paper (Paper
Weight 1)
Thick Paper (Paper
Weight 3-8)
Default (Paper
Weight 2)
0614 Exit Guide Close Timing
Specify the timing to close the Paper Exit Guide when sheets are ejected and delivered to the Shift Tray
of Finisher SR5050 or Booklet Finisher SR5060.
The machine opens and closes the Paper Exit Guide each time it ejects stapled sheets. If the Paper Exit
Guide does not open and close at a proper timing, bending may occur with the stapled stack when
stapled sheets fail to be properly ejected. Select the timing appropriate for the paper you are using.
Setting Items Values Default Value
Set Default
Thin Paper
Default
0615 Output Trail Edge Press Setting
Specify whether or not to hold the trailing edge of sheets when they are ejected and delivered to the
Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.
If too many sheets are delivered to the Shift Tray, the Ejected sheets may not be correctly aligned due to
the paper type and paper condition.
Setting it to [On] reduces the diversion of sheets.
Setting Items Values Default Value
Set Auto
On
Off
Auto
0616 Output Fan Setting
Specify the fan operation to the sheets on the Shift Tray when sheets are ejected and delivered to the
Shift Tray of Finisher SR5050 or Booklet Finisher 5060.
6. Adjustment Settings for Operators
194
To Next Page
Loading...
