Ricoh Pro C9210 - Page 197

Blowing air peels off the sheets in close contact.
Setting Items Values Default Value
Set Auto
On
Off
Auto
0617 Output Fan Level
Specify the air flow of the fan on the Shift Tray when sheets are ejected and delivered to the Shift Tray of
Finisher SR5050 or Booklet Finisher 5060.
Increase the level if the sheets ejected on the Shift Tray are in close contact.
Setting Items Values Default Value
Set Auto
Increase Air Volume
Auto
0618 Staple Position for Booklet
Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5060.
Press [ ] to move the position left, or press [ ] to move it right on the open booklet.
Paper feed direction
CWY016
Setting Values
195