Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
A3 SEF
B4 JIS SEF
A4 SEF
B5 JIS SEF
11 × 17 SEF
8
1
/
2
× 14 SEF
8
1
/
2
× 11 SEF
8K SEF
Other Paper Sizes
0.0 4.0 -4.0 0.2 mm
0716 Gate Fold Position 2
Adjust the fold position (S2) of the bottom segment 2 of gatefold sheets when using the fold unit.
Press [ ] to increase and [ ] to reduce (S2).
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge. The illustration below shows a gatefold sheet partially opened in the half-folded state.
Paper feed direction
S1 S2
L3
DWP567
6. Adjustment Settings for Operators
216
To Next Page
Loading...
