5. Multi-folding unit
Applies the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-
fold.
6. Interposer
Inserts cover or slip sheets into printed paper.
7. Multi bypass tray (Tray A)
Holds up to 500 sheets of paper.
8. Multi bypass attachment kit
Attaches the multi bypass tray (Tray A) to the wide LCT.
9. Banner sheet tray of multi bypass tray (Tray A)
Allows you to load large-sized paper in the multi bypass tray (Tray A).
10. Finisher SR5050
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
Prints can be punched if the optional punch unit is installed on the finisher.
11. Perfect binder
Applies adhesive to the spine of gathered pages to bind them in a booklet.
12. Interface box
Allows you to connect extended options to the machine.
13. Wide LCT
Holds up to 4,800 sheets of paper. You can load paper whose sizes are up to SRA3 or 13 × 19
1
/
5
. You can
connect up to three wide LCTs.
14. Bridge unit of wide LCT
Connects a wide LCT to an additional wide LCT.
15. Banner sheet tray of wide LCT
Allows you to load large-sized paper in the wide LCT.
• You cannot install multiple finishers simultaneously.
• If you have connected two high capacity stackers, you cannot install the multi-folding unit, the ring
binder, or the perfect binder at the same time.
• You cannot attach the banner sheet tray of wide LCT and the banner sheet tray of multi bypass tray
(Tray A) simultaneously.
• You can install the multi-folding unit only if either Finisher SR5050 or Booklet Finisher SR5060 is
installed.
• You can install the ring binder or the perfect binder only if one of the following options is installed:
Finisher SR 5050, Booklet Finisher SR 5060, or the high capacity stacker.
4. Getting Started
60
To Next Page
Loading...
