Ricoh Pro C9500 - [Finishing: Interposer]; 2101 [Detect JAM573]; 2101 [Detect JAM574]; 2102 [Interposer Fan Setting]

[Finishing: Interposer]
2101 [Detect JAM573]
Set ON / OFF for JAM573 (detection of multi feed).
Specify whether or not to detect special paper (two-ply paper, such as label paper) as a paper jam.
If set to [Off], you can prevent such erroneous detection.
Setting Items Values Default Value
[Interposer Upper Tray] [Off]
[On]
[On]
2101 [Detect JAM574]
Set ON / OFF for JAM574 (detection of multi feed).
Specify whether or not to detect special paper (two-ply paper, such as label paper) as a paper jam.
If set to [Off], you can prevent such erroneous detection.
Setting Items Values Default Value
[Interposer Lower Tray] [Off]
[On]
[On]
2102 [Interposer Fan Setting]
Set the fan operation for Interposer.
When it is [On], air is blown to the edge of sheets to separate them in close contact.
• [Interposer Upper Tray]
• [Interposer Lower Tray]
2. Details of Menu Items in Adjustment Settings for Skilled Operators
80