FC
Specify the output reference value for secondary transfer on the leading or trailing edge of paper in the
following conditions:
Full Color print
Setting Item Max. Value Min. Value Step Unit
07: Leading Edge: DC Mode/08: Leading
Edge: AC Mode: DC/10: Trailing Edge:
DC Mode/11: Trailing Edge: AC Mode:
DC/12: Trailing Edge: AC Mode: AC
300 5 1 %
09: Pre-Transfer Voltage 13 0 0.1 -kV
1217: Paper Transfer Output Correction: Paper Edge
BW
Adjust the output compensation amount and range at the leading edge of paper for secondary transfer
in the following conditions:
Black & White print
Setting Item Max. Value Min. Value Step Unit
01: Leading Edge/03: Trailing Edge/04:
Trailing Edge: AC
10 -10 1 None
02: Leading Edge Length 30 0 mm
05: Trailing Edge Length 100
FC
Adjust the output compensation amount and range at the leading edge of paper for secondary transfer
in the following conditions:
Full Color print
12: Machine: Image Quality
161
To Next Page
Loading...
