Setting Item Max. Value Min. Value Step Unit
06: Leading Edge/08: Trailing Edge/09:
Trailing Edge: AC
10 -10 1 None
07: Leading Edge Length 30 0 mm
10: Trailing Edge Length 100
1218: Paper Transfer Output
Specify the Output Mode that matches the paper. Use [Special Paper] when using metallic or other
special paper.
Setting Item Values
01: Output Mode Special Paper
Normal
Textured Paper
1219: High Duty AC: AC Environmental Correction: MH
BW
Under the following conditions, set the environmental correction value of high duty AC bias to be
superimposed on the paper transfer output.
MH Environment: Black & White Printing
Setting Item Max. Value Min. Value Step Unit
01: Side 1/02: Side 2 200 10 1 %
1220: High Duty AC: DC Environmental Correction: MH
BW
Under the following conditions, set the environmental correction value of high duty AC bias to be
superimposed on the paper transfer output.
MH Environment: Black & White Printing
4. Adjustment Setting Items for a Custom Paper
162
To Next Page
Loading...
