Ricoh Pro C9500 - 1312: Bypass Tray; 1311: Correct Paper Curl

An initial value is specified by default when you are not entering the value that you measured on paper
in [Paper Thickness]. Do not change the default value in the case.
Setting Item
Max.
Value
Min.
Value
Step Unit
05: Paper Thickness 2,000 20 10 m
Specify the ascending speed of the tray when you specify [Always Assist On] or [Assist On When
Remaining Paper Low] in [Assist Mode].
Setting Item Values
06: Speed Slowest
Slower
Standard
Faster
Fastest
1312: Bypass Tray
[Pickup Assist]
Set the operation of the paper feed roller of Bypass Tray. If [On] is set, contact time of the roller is
extended.
Setting Item Values
01: Setting Off
On
1311: Correct Paper Curl
Select the mode and amount of curl correction for output paper.
4. Adjustment Setting Items for a Custom Paper
176