• It may take longer for the machine to recover from the energy saving mode when the Auto Color
Diagnosis function is enabled.
• The machine does not enter the energy saving mode in the following cases:
• When fixed warm-up is in progress
• When operations are suspended during printing
• When a screen that does not support Auto Logout is displayed
• The machine does not enter Low Power Mode (Energy Saving Priority) in the following cases:
• When the covers of the machine including the covers of the external options are open
• When a user is operating on the control panel of the machine (excluding operations from a
client computer)
• The machine does not enter Sleep Mode in the following cases:
• When the machine is warming up
• When the machine is initializing its data
• When the machine is preparing to restart
• When receiving remote support from a call center
• When the machine is performing Image Position adjustment
• When obtaining the logs from Auto color diagnosis unit
• When obtaining the debug logs
• When performing a Batch Update of the system
• When outputting the device information of the machine
• When outputting the detection result report PDF of Image Quality Monitor
• When updating the calibration data
• When the Image Quality Monitor Detection Settings or Image Quality Monitor Result screen
appears on a client computer
• Even when the machine is in the energy saving mode, you can connect remotely to the machine
from the web browser on a client computer as long as the printer controller remains turned on.
Turning On and Off the Power
17
To Next Page
Loading...
