Ricoh Pro C9500 - Page 249

• Open the finisher front
cover.
• Turn knob Rb10.
• Turn knob Rb11 9 to
11 times.
• Pull handle Rb12, and
then pull out the
staple unit.
• Raise lever Rb13, and
then remove misfed
paper.
• Return lever Rb13 to
its original position.
• Turn knob Rb14, and
then remove misfed
paper.
• Lower lever Rb15,
and then turn knob
Rb16.
• Remove misfed paper.
• Raise lever Rb17, and then remove misfed
paper.
• Return lever Rb17 to its original position.
• Return the staple unit to its original position,
and then close the finisher front cover.
CXG024
When Rb12 – Rb13 is displayed
• Open the finisher front
cover.
• Pull handle Rb12, and
then pull out the
staple unit.
• Raise lever Rb13, and then remove misfed
paper.
• Return lever Rb13 to its original position.
• Return the staple unit to its original position,
and then close the finisher front cover.
CXG033
When Rt1 or Rt2 is displayed
When Paper Is Jammed
247