No. Option Description
2 Booklet finisher
Sorts, stacks, and staples multiple sheets of paper. The saddle
stitch function can staple multiple sheets of paper in the center
and fold them into booklets. Consists of the following paper
trays:
• Finisher shift tray 1
• Finisher shift tray 2
• Finisher booklet tray
Prints can be punched if the optional punch unit is installed on
the finisher.
3 Trimmer unit
Cuts the fore edge of the book block after the book block is
saddle stitched.
Booklet finisher is required in order to attach this.
4
Output banner sheet
tray
Paper that is 139.7–700.0 mm (19.2–27.6 inches) in the
horizontal length can be ejected onto the booklet finisher or
finisher.
5
Extension output
banner sheet tray
Paper that is 139.7–1260.0 mm (19.2–49.7 inches) in the
horizontal length can be ejected onto the booklet finisher or
finisher.
6 High capacity stacker
Consists of the following paper trays:
• Stacker upper tray
• Stacker tray
The stacker upper tray can hold up to 250 sheets of paper, and
stacker tray can hold up to 5,000 sheets of paper. You can
connect up to two high capacity stackers.
7 Multi-folding unit
Applies the following folds: Half Fold, Letter Fold-out, Letter
Fold-in, and Z-fold.
8 Interposer
Inserts cover or slip sheets into printed paper. By attaching the
double-feed detection kit for the interposer, the machine is
configured to detect double feeds from the interposer.
You can attach finisher or booklet finisher together with this.
9
Perfect binder Applies adhesive to the spine of gathered pages to bind them in
a booklet.
1. Getting Started
26
To Next Page
Loading...
