(3) Other Options
No. Option Description
1 Interface box Allows you to connect extended options to the machine.
• You cannot install multiple finishers simultaneously.
• If you have connected two high capacity stackers, you cannot install the multi-folding unit or the
perfect binder.
• You can install the multi-folding unit only if either finisher or booklet finisher is installed.
• You can install the perfect binder only if one of the following options is installed: finisher, booklet
finisher, or the high capacity stacker.
• The multi bypass tray (Tray A) can be attached only if the wide LCT is installed. However, you can
attach the multi bypass tray (Tray A) to the wide LCT only if the multi bypass attachment kit is
installed.
• When the perfect binder is attached, printing on banner paper (700.1–1260 mm, 27.56–49.61
inches) is not possible. You can specify such paper as a custom size paper on the control panel,
but the machine aborts preparation when printing is performed. If this occurs, cancel the job.
• LCT banner sheet tray and extension LCT banner sheet tray cannot be attached at the same time.
• When using multiple linked wide LCT, LCT banner sheet tray/extension LCT banner sheet tray can
be attached only to the wide LCT that is the furthest from the machine.
• When using multiple linked wide LCTs, the multi bypass tray (Tray A) can be attached only to the
wide LCT closest to the machine.
• Notes on the tray of extension output banner sheet tray
• The tray folds up when force is applied downward on the tip of the tray. Do not push, lean on,
or place an object on or near the tip of the tray. Doing so may cause damage or malfunction
of the machine.
• When the tray folds up, return it to its original position.
Machine Options
27
To Next Page
Loading...
