Check that the paper retainer is extended when you load paper of 220 g/m2 (55 lb. Bond) or
lower. Push on the lever on the fence to extend the paper retainer.
1. Paper retainer
Check that the paper retainer is retracted when you load paper of 220.1 g/m2 (55 lb. Bond) or
higher.
Use the paper size indicators on the bottom of the paper tray to adjust the fences the space
provided by the fences is somewhat wider than the paper size. Load paper so that both sides are
on the auxiliary fences.
7. Take the grip of the fences with your fingers, and adjust the fences to the paper.
Set the paper flush against the inner fence.
Check that the scale numbers on the top of the fences are roughly the same.
Loading Paper into the Paper Tray
75
To Next Page
Loading...
