Convenient Usage
54
Rewind the media so that media tip place on the platen edge by rotating the roll holder on
the back. At that moment, you must close the center cover and upper the media hold lever.
Pull the other end of the tape straight down and attach it to the roll core using adhesive tape
as shown.
Carry out the latter procedure, seeing the operating instructions.
Begin inputting the media setting with the control panel.
Make sure the media is taut; otherwise, it may not be taken up correctly.
Referring to the section “setting media” in the manual” Operating Instructions”
or the following video.
How to set media:
https://www.youtube.com/watch?v=aRqvMQCfMTg&feature=youtu.be
https://2280171.mediaspace.kaltura.com/media/How+to+set+media+on+the+Pro+L5130+s
eries+of+wide+format+devices/1_mlm093yt
To Next Page
Loading...
