15. Press [Completed].
16. Press [Completed].
As required, press [Back] and return to Step 13.
17. Press [End].
• If the control panel is not used for 30 minutes, the adjustment value entry menu is canceled and the
Home screen returns. If this happens, carry out the adjustment procedure again from the beginning.
• If the print result does not include a square pattern with aligned verticals on both sides, enter as the
adjustment value the number above the closest match to such a pattern. Then, after the adjustment,
manually perform drop position adjustment again.
• Perform the adjustment repeatedly until a square pattern having the faintest and closest color to
gray and aligned verticals on both sides is printed below "0".
2. Basic Operations
100
To Next Page
Loading...
