Performing the Connection Method for the Print Heads Manually
If image quality defects cannot be reduced even after performing the connection method for the print
heads automatically or you want to adjust visually, perform the connection method for the print heads
manually.
When using transparent or colored media, perform the connection method for the print heads manually.
1. Press the [Standard Procedure] key.
2. Press [Selected Setting for Head Alignment].
3. Press [Print Head Alignment].
4. Press [Manual].
5. Press [Execute].
The test pattern of the print head alignment is printed.
6. Check the optimal mode based on the printing result of the test pattern of the print head
alignment.
Determine which test pattern has the least visible line, and use the letter on the left of the test pattern
to identify the optimal mode. In the following example, [A] has the least visible line and is therefore
optimal.
Performing the Connection Methods
109
To Next Page
Loading...
