Using the Timer Settings
This section explains the settings for energy saving and the timer function.
Configuring Sleep Mode Transition Time
After a specified period has passed, the machine enters Sleep mode in order to conserve energy.
Specify the time to elapse before entering Sleep mode.
1. Press the [User Tools] key.
2. Press [Time and Timer Settings].
3. Press [Sleep Mode Transition Time].
4. Enter the time to elapse before entering Sleep mode using the number keys, and then
press [Set].
5. Press [Close].
6. Press [End].
Configuring Cooling Mode
Specify whether to allow the pre-heater, print heater, and post-heater to enter Cooling mode after a
specified period has passed. In Cooling mode, setting the temperature of heaters lower than the
3. Convenient Usage
128
To Next Page
Loading...
