Ricoh Pro L5160 - Switching the Indication Unit

1. Press the [User Tools] key.
DWU101
2. Press [Time and Timer Settings].
3. Press [Time].
4. Enter the time to be displayed using the number keys, and then press [Set].
To change between hours, minutes, and seconds, press [ ] or [ ].
5. Press [Close].
6. Press [End].
Switching the Indication Unit
Set the unit of length and temperature to be displayed on the control panel. This section uses the
procedure for switching the unit of length as an example.
1. Press the [User Tools] key.
DWU101
2. Press [General Settings].
3. Press [mm/inch selection].
Select [°C/°F selection] when changing the unit of temperature.
4. Select a unit to be displayed.
The unit displayed on the control panel switches to the selected unit.
Changing the Machine Settings
133