the configured temperature can reduce power consumption. Also, Cooling mode keeps the
temperature of the heaters stable so that it can shorten the standby time that occurs before printing.
• Cooling Mode Setting
Specify whether to enable Cooling mode.
• On
• Off
Default: [On]
When Cooling mode is set to [On], you can specify [Transition Time] and [Cooling Ratio].
• Transition Time
Specify the time to elapse from after printing until entering Cooling mode.
Default: [1 minute(s)]
The transition time can be set from 1 to 120 minutes, using the number keys.
• Cooling Ratio
Specify the descent temperature from the configured temperature of the pre-heater, print
heater, and post-heater.
(mainly Europe and Asia)
• 5°C
• 10°C
• 15°C
• 20°C
• 25°C
• 30°C
Default: [20°C]
(mainly North America)
• 9°F
• 18°F
• 27°F
• 36°F
• 45°F
• 54°F
Default: [36°F]
Date
Indicates the date for the machine's internal clock.
This item is for confirmation only; it cannot be changed.
List of Setting Items
139
To Next Page
Loading...
