4. Uncap the new waste ink bottle, and then attach the inner and outer caps of the used
waste ink bottle.
5. Wipe off any ink that dripped around the tube, and then install the new waste ink bottle.
When installing the waste ink bottle, insert the tube into the spout of the bottle.
6. Press [Reset].
7. Press [0] to set the waste ink level to 0%.
8. Press [Set].
9. Press [End].
• When printing is interrupted, the confirmation screen will be displayed after replacing the waste ink
bottle. Press [Resume] to restart printing. However, the quality of the print cannot be guaranteed.
Replacing Consumables
245
To Next Page
Loading...
