Ricoh Pro L5160 - Changing Roll Media

• If the message "Cannot detect the media." appears, operate the media holder lever to display the
media replacement menu.
Changing Roll Media
This section explains how to remove and change roll media. Change the roll media with the machine
turned on.
1. Press [Origin Setting/Cut] on the bottom right of the screen.
2. Press [Feed] or [Rewind] to feed the media to the cutting position.
3. Press [Cut].
The selection screen for the cutting position is displayed.
4. Select [Position of the cutter], and then press [Cut].
5. Press [Yes].
The media is cut at the position of the cutter.
2. Basic Operations
68