Ricoh R8 - Page 43

If you are using the camera for the first time, read this section.
41
3 Press the ADJ./OK button !" to select the flash
mode.
• The flash mode symbol is displayed at the upper left of the
picture display.
• The flash mode symbol blinks at the upper left of the picture
display when the flash is charging. Once the flash is charged,
the symbol stops blinking and lights steadily and the camera is
ready to shoot.
Note ---------------------------------------------------------------------------------------------------
• The flash mode setting is retained until you press the ADJ./OK button toward F
(Flash) again.
• The flash does not fire when shooting movies, in Multi-shot mode, in auto bracket, in
white balance bracket, and in color bracket.
• The auxiliary flash fires to increase the AE accuracy.
• Setting the ISO setting to [ISO 400] or lower reduces the range of the flash.