• Connect the machine and computer with an Ethernet cable before configuring the settings.
• Check the security method employed by the access point being used.
• Check the machine's IP address. Press the [ /Menu] key to display [Host Interface], select
[Network Setup], and then select [IPv4 Address] to display the IP Address.
1. Launch the Web browser.
2. In the address bar, enter "http://(machine's IP address or host name)/".
3. Click [Administrator Login].
A dialog box for entering the user name and password appears.
4. Enter the user name and password, and then click [OK].
If this is the first time to log in, enter "admin" as the user name and leave the password blank.
5. In the menu area, click [Settings].
6. Click [Wireless LAN Settings].
Connecting the Computer and Installing the Software (Network Connection)
59
To Next Page
Loading...
