• A message appears if there is a newer version of the printer driver already installed. If this is the
case, you cannot install the printer driver using Auto Run. See page 223 "If a Message Appears
during Installation".
Using the LPR port
This section explains how to install the printer driver (TCP/IP) and set up the LPR Port.
• Only administrators can perform this installation. Log on as a member of the Administrators group.
1. Insert the CD-ROM in the CD-ROM drive.
Quit all applications currently running.
2. Select an interface language, and then click [OK].
3. Click [Printer Driver].
4. Read the entire license agreement carefully. If you accept its terms, click [I accept the
agreement.], and then click [Next >].
5. Click [Connect to a printer port or LAN], and then click [Next >].
To search for printers automatically, select [Search for printers automatically], and then follow the
wizard's instructions.
To search for a printer by its IP address, select [Search for printers by specified IP Address], and
then follow the wizard's instructions.
If you do not search for a printer, select [Select a port or specify a new port]. In this example
procedure, [Select a port or specify a new port] is selected.
6. Select [Specify a new port] and click [Next >].
7. Click [LPR Port], and then click [Next >].
If [LPR Port] does not appear, see Windows Help and install it.
8. Enter the machine's IP address in the [Name or address of server providing lpd] box.
9. Enter "lp" in the [Name of printer or print queue on that server] box, and then click [OK].
10. If necessary, configure the default printer.
11. If necessary, configure the setting for sharing the printer.
12. Click [Continue].
The printer driver installation starts.
13. If you want to make initial settings for the printer, click [Set Now].
14. Make initial settings, and then click [OK].
15. Select whether or not to open the Status Monitor automatically, and then click [Next >].
2. Preparing for Printing
66
To Next Page
Loading...
