Ricoh Ri 1000 - Circulation; Empty the Waste Ink Bottle

RICOH Ri 1000
User Manual
91
6.5. Circulation
• This printer has the function of white ink circulation that moves the white ink in the system from the
ink bay to the printhead and back. This is used to avoid the white ink settling within the lines and
provides quality white ink prints.
6.6. Empty the Waste Ink Bottle
• Once a certain amount of ink has been used, the following message is displayed on the touch panel.
• Put the waste ink form the waste ink bottle into a container to discharge it.
• You can check the amount of waste ink on the [Status Panel] and reset the waste ink counter.
• To reset the waste ink counter, after the waste ink tank has been emptied, press [WASTE INK RESET]
button.
Warning
❖ Do not reset the waste ink tank warning WITHOUT emptying the waste ink tank, this will avoid
any spilling or other potential hazards