72
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. To prevent injury, when you
open the front or back cover (back output
tray) of the machine, DO NOT touch the
shaded parts shown in the illustration.
a Open the front cover.
b Slowly take out the drum unit and toner
cartridge assembly.
We recommend that you put the drum unit
and toner cartridge assembly on a clean,
flat surface with a piece of disposable paper
or cloth underneath it in case you
accidentally spill or scatter toner.
To prevent damage to the machine caused
by static electricity, DO NOT touch the
electrodes shown in the illustration.
c Push down the blue lock lever and take
the used toner cartridge out of the drum
unit.
DO NOT put a toner cartridge into a fire. It
could explode, resulting in injuries.
To Next Page
Loading...
