On a Type 4 model, press the [ ] key. If ID card copy mode is being displayed,
press the [ ] key again to switch to normal copier mode.
2. Press the [ ] or [ ] key in the standby mode screen to select [Reduce/Enlarge], and then
press the [OK] key.
3. Press the [ ] or [ ] key to select the ratio, and then press the [OK] key.
If [Zoom: 25-400%] has been selected, enter the ratio using the number keys, and then press the
[OK] key.
4. Press the [ ] key to return to the initial screen.
• To apply the specified setting to all jobs, specify [Reduce/Enlarge] in [Copier Features].
Making Enlarged or Reduced Copies
49
To Next Page
Loading...
