5. Press the [Start] key.
Depending on the machine's settings, you may see the following screen on the display when
scanning from the exposure glass.
If you see this screen, proceed to the next step.
6. If you have more originals to scan, place the next original on the exposure glass, and
then press [Yes]. Repeat this step until all originals are scanned.
7. When all originals have been scanned, press [No] to start sending the scanned file.
• To cancel scanning, press the [Scanner] key, and then press the [Clear/Stop] key. The scan files
are discarded.
• You can also specify a destination using the One Touch buttons, [Pause/Redial] key (only SP
221SF, SP 220SFNw, and SP 221SFNw). For details, see page 109 "Specifying the Scan
Destination Using the One Touch Buttons or [Pause/Redial] Key".
5. Scanning Originals
108
To Next Page
Loading...
