Configuring the System Settings
Click [System Settings] to display the page for configuring the system settings.
This page contains the following tabs: [Sound Volume Adjustment] (only SP 221SF, SP 220SFNw, and
SP 221SFNw), [Tray Paper Settings], [Copier], [Fax], [Toner Management], [Interface], and [Shortcut
to Function].
Sound Volume Adjustment Tab
This function is available for only SP 221SF, SP 220SFNw, and SP 221SFNw.
Sound Volume Adjustment
Item Description
Panel Key Sound Select the volume of the beep that sounds when a key is pressed from [Off],
[Low], [Middle], or [High].
On Hook Mode Select the volume of the sound from the speaker during on hook mode from
[Off], [Low], [Middle], or [High].
Job End Tone Select the volume of the beep that sounds when a job is complete from
[Off], [Low], [Middle], or [High].
Job Error Tone Select the volume of the beep that sounds when a fax transmission error
occurs from [Off], [Low], [Middle], or [High].
Alarm Volume Select the volume of the alarm that sounds when an operation error occurs
from [Off], [Low], [Middle], or [High].
Tray Paper Settings Tab
Tray 1
Item Description
Paper Size Select the paper size for tray 1 from the following:
A4 (210 × 297 mm), Letter (8.5 × 11), B5 (182 × 257 mm), B6 (128 ×
182 mm), A5 (210 × 148 mm), A5 (148 x 210 mm), A6 (105 × 148
mm), Legal (8.5 × 14), Foolscap/Folio (8.5 × 13), 8.5 × 13.4, Indian
Legal (8.5 × 13.6), 16K (195 × 267 mm), Australian-FOOLSCAP (8.11 ×
13.3), Half Letter-S (5.5 × 8.5), Custom Size
8. Configuring the Machine Using Utilities
208
To Next Page
Loading...
