Ricoh SP 230SFNw - Document Becomes Wrinkled; Document Size Is Not Detected Correctly

2-87
Confidential
 Paper jam in the paper eject section of the ADF
<User Check>
• Check that the thickness of the document is 64 to 105 g/m
2
.
4.11.4Document becomes wrinkled
<User Check>
• Check that the document is not curled.
• Check that the document guide is adjusted to suit the document size.
4.11.5Document size is not detected correctly
<User Check>
• Check that the document size is within the standard.
Step Cause Remedy
1
Foreign object in the ADF
document eject path
Remove the foreign object.
2
Document pinch roller coming
off
Reattach the document pinch roller.
3
Abrasion of document eject
roller
Replace the ADF unit.
4 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1
Abrasion of document
separate roller
Replace the document separate roller ASSY.
2
Abrasion of document feed
roller
Replace the ADF unit.
Step Cause Remedy
1
Document scanning position
actuator caught in some
sections of the machine
Reattach the document scanning position
actuator.
2 ADF motor failure Replace the ADF unit.
3 Main PCB failure Replace the main PCB ASSY.