Ricoh SP 230SFNw - Message Indicating that the Report Is Full Does Not Disappear; Paper Tray Cannot be Recognized

2-97
Confidential
4.14.4Message indicating that the report is full does not disappear
<User Check>
• Output each report.
4.14.5Paper tray cannot be recognized
<User Check>
• Close the paper tray properly.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1
Connection failure of the T1
paper feed sensor harness
Reconnect the T1 paper feed sensor
harness.
2
T1 paper feed sensor PCB
failure
Replace the T1 paper feed sensor PCB
ASSY.
3 Main PCB failure Replace the main PCB ASSY.