Ricoh SP 230SFNw - Page 155

3-37
Confidential
(6) Remove the three Taptite bind B M4x12 screws to remove the Hinge ASSY L from the ADF
unit.
Fig. 3-25
(7) Remove the Taptite cup B M3x10 screw to remove the Hinge R support and the Hinge R
from the Hinge arm R.
(8) Remove the three Taptite cup B M3x10 screws to remove the Hinge arm R from the ADF
unit.
Fig. 3-26
Hinge ASSY L
Taptite bind B M4x12
ADF unit
Hinge R
Taptite cup B M3x10
Taptite cup B M3x10
Hinge R support
Taptite cup B M3x10
Hinge arm R
ADF unit