App. 1-1
Confidential
APPENDIX 1 DELETING USER SETTING
INFORMATION
The user setting information for the machine is stored in the main PCB. You can return this to
the default settings by following the procedure below.
<Operating Procedure>
(1) Press the [Menu] while the machine is in the ready state.
(2) Press the [▲] or [▼] to display “Initial Setup” on the LCD, and press the [OK].
(3) Press the [▲] or [▼] to display “Reset” on the LCD, and press the [OK].
(4) Press the [▲] or [▼] to display “Machine Reset” on the LCD, and press the [OK].
“Machine Reset ▲Reset ▼Exit” appears on the LCD, and press the [▲].
(5) “Reboot OK? ▲Yes ▼No” appears on the LCD. Press the [▲] to delete the user
setting information and return the machine to the ready state.
To Next Page
Loading...
