2-26
Confidential
Print Unable
E5
Turn the power off
and then back on
again.
An error occurred during access
to the DRAM in the main PCB
ASSY.
E500 2-55
Print Unable
E6
Turn the power off
and then back on
again.
Write error in the EEPROM of
the main PCB ASSY
E600 2-55
Print Unable
E7
Turn the power off
and then back on
again.
System error in the flash ROM E701 2-55
Read error in the flash ROM
E702 2-55
Print Unable
ZC
Turn the power off
and then back on
again.
Detected that supply power is
unstable. (less than 100 times)
6F00 2-42
Replace Drum -
Number of the drum unit
rotations has reached the upper
limit.
4200 2-37
Replace Toner -
Dot count or develop roller
counter of the toner cartridge is
reaching the upper limit in the
continuous printing mode.
4D01 2-38
Open the Front
Cover, replace
Toner Cartridge.
Dot count or develop roller
counter of the toner cartridge
has reached the upper limit in
the toner stop mode.
4C01 2-38
Scan Unable Document is too
long for 2-sided
scanning. Press
Stop key.
The document scanning
position sensor detected that
the document length was 400
mm or longer and could not be
fed to ADF (double-side
restoration).
BF00 2-54
Remove the original
document. Turn the
power off, then on
again.
Image processing cannot be
completed correctly because
the number of pixels required
for image processing is
insufficient in the scanned first
side data.
AD00 2-51
Scan Unable
AF
Turn the power off
and then back on
again.
Home position is still being
detected even after the first side
CIS unit was moved.
AF00 2-52
Scanner Error -
A white level not within the
standard was scanned when
function code 55 was executed.
BB00 2-53
A black level not within the
standard was scanned when
function code 55 was executed.
BD00 2-53
Error message
Description
Error
codes
Refer
to:
Initial display Scroll
To Next Page
Loading...
