2-47
Confidential
Error code 9302
When paper was fed from the paper tray, the T1 paper feed sensor detected that no paper
was in the paper tray.
<User Check>
• Set paper in the paper tray.
Step Cause Remedy
1
Connection failure of the T1
paper feed sensor harness
Reconnect the T1 paper feed sensor
harness.
2
Connection failure of the T1
clutch harness
Reconnect the T1 clutch harness.
3
Connection failure of the paper
feed motor flat cable
Reconnect the paper feed motor flat
cable.
4
T1 paper feed actuator caught in
some sections of the machine
Reattach the T1 paper feed actuator.
5 Abrasion of the PF kit 1 Replace the PF kit 1.
6
Paper feed motor flat cable
failure
Replace the paper feed motor flat cable.
7 T1 clutch failure Replace the T1 clutch.
8
T1 paper feed sensor PCB
failure
Replace the T1 paper feed sensor PCB
ASSY.
9 Paper feed motor failure Replace the paper feed motor.
10
Damaged gears in the paper
feed drive system
Replace the frame L unit.
11 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
