Ricoh SP 311SFNw - Page 167

7. Press the [ ] or [ ] key to select [Inactive], and then press the [OK] key.
8. Press the [ ] or [ ] key to select [Manual Config. Address], and then press the [OK] key.
9. Press the [ ] or [ ] key to select [Manual Config. Address], and then press the [OK] key.
10. Enter the machine’s IPv6 address using the number keys, and then press the [OK] key.
11. Press the [ ] or [ ] key to select [Prefix Length], and then press the [OK] key.
12. Enter the prefix length using the number keys, and then press the [OK] key.
13. Press the [ ] or [ ] key to select [Gateway Address], and then press the [OK] key.
14. Enter the gateway address using the number keys, and then press the [OK] key.
15. Press the [User Tools] key to return to the initial screen.
16. If you are requested to restart the machine, turn off the machine, and then turn it back on.
Network Settings
165