Low Humidity Mode
Item Description Value
Low Humidity
Mode
If the machine is used in a room where
humidity level is low, black lines of a
few millimeters thick may appear on
printouts with 75-millimeter spaces in
between. Selecting [On] for this setting
may prevent these lines from
appearing (wait for about one day
until this setting becomes effective).
Note that when this setting is enabled,
the machine automatically performs
self-maintenance in every 10 minutes.
• Off
• On
Default: [Off]
Image Density
Item Description Value
Image Density Adjusts the density of images on prints. -3 to +3
Default: 0
System Settings
197
To Next Page
Loading...
