Using Web Image Monitor
49
4
Configuring the SNMP Settings
Click the [SNMP] tab on the network settings page to configure the SNMP settings.
❖ SNMP Setting
❖ Trap
❖ Community
Item Description
SNMP Select whether to enable the printer to use
SNMP services.
Item Description
Target Trap Select whether to enable the printer to send
traps to the management host (NMS).
SNMP Management Host 1 Enter the IP address or host name of a manage-
ment host. Can contain up to 32 characters.
SNMP Management Host 2 Enter the IP address or host name of a manage-
ment host. Can contain up to 32 characters.
Item Description
Get Community Enter the community name to use for authen-
tication of Get requests. Can contain up to 32
characters.
To search for this printer in Smart Organizing
Monitor, specify “public”.
Trap Community Enter the community name to use for authen-
tication of Trap requests. Can contain up to 32
characters.
To Next Page
Loading...
