Printer Configuration
3
Printer Configuration
[Paper Input] Tab
Make paper settings such as size and type for each paper tray.
Tray 1
v Paper Size
In the [Paper Size] list, select the size of paper loaded in the input tray.
When [Custom Paper Size] is selected, specify one of the sizes below.
v Paper Type
In the [Paper Type] list, select the paper type.
v Custom Paper Size
Enter the custom paper size when [Custom Paper Size] is selected.
•Unit
Select which units (mm or inch) to use for entering lengths in the [Horizontal]
and [Vertical] boxes.
• Horizontal/Vertical
Enter the custom paper size when [Custom Paper Size] is selected. In the
units selected earlier (mm or inch), enter the length of the paper's short and
long edges in the [Horizontal] and [Vertical] boxes respectively.
Note
r Available paper sizes vary depending on the paper tray. For details about set-
ting the paper size, see the printer operating instructions.
Tray 2
v Paper Size
In the [Paper Size] list, select the size of paper loaded in the input tray.
v Paper Type
In the [Paper Type] list, select the paper type.
Note
r Available paper sizes vary depending on the paper tray. For details about set-
ting the paper size, see the printer operating instructions.
To Next Page
Loading...
